Check the "Contract Updates
for the Week"
Click here for piggybacking data form |
LATHE AND MILLING MACHINES |
| (contract last updated 06/07/2012) |
|
SCOPE: Contract for 17” x 60” Lathe and Vertical Knee Milling Machines with Computer Controls. |
|
| CONTRACT # |
DESCRIPTION |
|
11-5348 |
LATHE AND MILLING MACHINES |
| CONTRACT ORIGIN: |
ADDITIONAL INFORMATION: |
UW-Madison
Purchasing Services
21 N Park St, Ste 6101
Madison, WI 53715-1218 |
UW-Madison users contact:
Vint Quamme
(608) 262-1147 FAX (608) 262-4467
vquamme@bussvc.wisc.edu |
| |
Non-UW-Madison users contact: Vendor Representative |
| COOPERATIVE PURCHASING: |
YES |
| CONTRACT TERM: |
April 15, 2011 through April 14, 2012,
with automatic renewal extensions to
April 14, 2014, unless
amended, cancelled or rebid. |
|
| Manufacturer(s) |
EISEN |
| Vendor(s) |
| 133346 |
| Eisen Machinery Inc |
| 11980 Telegraph Rd Ste 104 |
| Santa Fe Springs CA 90670 |
| |
| Sales Representative: |
PHONE # |
FAX # |
| Jason Ong |
562-941-7285 |
562-941-7864 |
| E-mail jason@eisenm.com |
| |
PHONE # |
FAX # |
| Ordering/Expediting: |
562-941-7285 |
562-941-7864 |
| Invoice Information: |
562-941-7285 |
562-941-7864 |
| Returns: |
562-941-7285 |
562-941-7864 |
| Supplier Diversity Reporting: |
562-941-7285 |
562-941-7864 |
| Website: www.eisenm.com |
|
| Commodity Code |
545-31 |
| Federal Employee ID # (FEIN) |
46-0495923 |
| F.O.B. |
“D” F.O.B. DESTINATION, FREIGHT PREPAID AND ALLOWED
“V” F.O.B. SERVICE/MAINTENANCE |
| Terms: |
N/30 |
| Delivery: |
14 days ARO |
| Invoicing: |
Invoices shall reflect contract pricing. |
| Warranty: |
One year |
| Return Policy: |
Contractor will provide for return of items ordered in error for up to 30 calendar days from receipt with the University paying only the return shipping costs. |
| Orders: |
E-mail, Fax |
| Back Orders: |
Will notify ordering department within 24 hours of order/release. |
| Pricing Information: |
SEE BELOW |
ITEM |
DESCRIPTION |
UNIT PRICE |
MANUFACTURER |
MODEL NO |
1 |
Vertical Knee Milling Machine |
$9,450.00 |
Eisen |
S-3A2 |
2 |
Lathe with 17" Swing 60" Between Centers |
$19,688.00 |
Eisen |
1760GVS |
| ITEM ADDED (6/7/12) |
| |
Vertical Knee Milling Machine with EVS head & 10" x 50" Table |
$10,025.00 |
Eisen |
S-3AII |
|
SPECIFICATIONS FOR MILLING MACHINES AND LATHES
| ITEM |
DESCRIPTION |
| 1 |
New Vertical Knee Milling Machine |
|
EVS Milling Head - 0 - 4500 RPM Yaskawa Drive |
|
Motor Type - Inverter-Type Variable Speed Drive w/ Digital Readout |
|
Motor Power - 3 HP |
|
Spindle Taper - R8 |
|
Quill Travel - 5 Inches - CHROMED QUILL |
|
Quill Diameter - 3.375 Inches |
|
Quill Power Feeds - 0.0016", 0.0032" & 0.0059" per Rev. |
|
Power Requirements - 220Volt 3 Phase |
|
Yaskawa Varialble Frequency Drive - Japanese Made |
|
True Back Gear In Drive |
|
Mill Spindle is Hardened, Precision Ground and Chromed |
|
Spindle is supported by preloaded (ABEC-7) bearings |
|
3 Bearing Support Head Design - This head design uses a 3rd Ball |
|
Bearing to support the drive pulley at the end of the motor shaft. |
|
High Precision - Spindle run out under 0.0002 inches |
|
Meehanite Casting |
|
10" x 50" Table |
|
15.5" Cross Travel (Y) - SQUARE WAY |
|
Vertical Travel Of Knee 16" |
|
Precision hardened & ground table & ways |
|
Hand Scraped saddle |
|
Adjustable backlash |
|
Turcite-B slide ways on X & Y axis |
|
One Shot Lubrication system |
|
Chip Cover |
|
Tool box w/tools |
|
Built-in coolant tank |
|
Draw Bar |
|
|
|
Additional Accessories: |
|
Servo Made – Power Feed 200 for Z axis (Installed) |
|
|
| 2 |
Lathe with 17” Swing x 60” between centers |
|
7.5 HP EVS w/Yaskawa Inverter Drive – 220 Volt 3 Phase |
|
3” Spindle Bore (D1-8) |
|
Steady Rest |
|
Follow Rest |
|
Face Plate |
|
Chuck Cover |
|
Full length splash guard |
|
Halogen work light |
|
Coolant System |
|
Center spindle sleeve w/Dead center |
|
Plastic Safety Drive Gear – Spindle Drive Safety Device |
|
10” Bison Set-Thru 6 Jaw chuck w/back plate (D1-8) |
|
12” 4-Jaw chuck (D1-8) |
|
Lever type 5C collet closer – Installed |
|
Micro Carriage Stop |
|
Foot Brake |
|
Back Plate (D1-8) – for 8” chuck |
|
|
|
Revision History |
| (6/7/12): added Vertical Knee Milling Machine with EVS head & 10" x 50" Table to Eisen Machinery Inc effective June 6, 2012. |
